Switching Languages in the Software
When you first download the software, the default language may be in Mandarin, which if you are fluent in Mandarin then it’s not a problem. But, if you’re not, then you may be wondering how to switch the language to English?
With the software open, from the menu at the top, count four tabs over from the right. Click on the fourth tab and select the second option from the drop-down menu.
Once you select the second option from the drop-down it will switch the language from Mandarin to English.
Getting the Software to Recognize Your Radio
If you plug your programming cable in, and then turn the radio on and attempt to read or write, the software, for whatever reason may not detect the radio.
Here is how to resolve this issue. With your programming cable plugged into your computer, start the software, but don’t plug the programming cable into the radio yet.
Once you have the software running, power the radio on, and then plug in the programming cable.
How to Access 256-bit Encryption in the Software
Next is accessing the 256-bit encryption in the software. When you are running the software for the first time you have to complete some steps to get into the 256-bit encryption.
- Click on Privacy Setting and enter the encryption setting interface.
2. Press and hold CRTL + SHIFT + P on the keyboard, and a prompt to restart will appear.
3. Click the “OK” button and the software will close. Run the software again, click on Privacy Settings, and there will be two tabs labeled Basic / Enhanced and Universal. The 256-bit encryption option will appear in the encryption settings.
4. The last step is setting up your encryption keys.